Releasing Cyrus IMAP - developer snapshots¶
Contents
These instructions describe the process of producing "developer snapshots" from the master branch. These are tag-only releases: no release tarball is published.
For normal point releases, see Releasing Cyrus IMAP - normal releases
We haven't been doing this much, or very consistently. Consider this document and process a work in progress, which we'll refine as we go.
You can look at the tag cyrus-imapd-3.3.1 and a few commits before it to get a sense of the kind of things this process involves.
Prerequisites¶
Same as for normal releases
Make sure master is good¶
With the master branch checked out and up to date:
Ensure your git repository is clean, using something like
git clean -xfd
. Note that this command will destroy any uncommitted work you might have, so make sure your ducks are in line before proceeding.Generate a configure script:
autoreconf -i -s
Generate everything else:
./configure --enable-maintainer-mode
(you do not need any other options at this stage).Run
make distcheck
. This will generate a distribution tarball, and test it in various ways. It takes about 10-15 mins to run, depending on your hardware. If you usually build Cyrus with a script that sets PATH etc, you will need to provide the same environment at this step. For example, ellie uses an alias like this for this step:alias distcheck="PATH=/usr/local/cyruslibs/bin:$PATH make distcheck"
.If
make distcheck
fails, you are not ready to proceed -- fix the problems, get them tested and committed, then restart this testing.make distcheck
can only test so much (it doesn't know about cunit or cassandane), so you also need to check the tarball against those.The tarball will be called something like
cyrus-imapd-3.0.0-rc2-23-g0241b22.tar.gz
(this corresponds to thegit describe
output).Extract it:
tar xfz cyrus-imapd-*.tar.gz
(substitute version for*
).Change into the directory:
cd cyrus-imapd-*
Configure it:
./configure [...]
(provide the same arguments and environment that you would when building for Cassandane at any other time).Compile it:
make -j4
-- it should build correctly.Run the unit tests:
make -j4 check
-- they should pass.Install it to your Cassandane prefix:
make install
Change into the cassandane directory within the extracted source (not the git source!):
cd cassandane
Build Cassandane's binary components:
make -j4
Run Cassandane:
./testrunner.pl
If any of this fails, get it fixed and merged, then redo this testing
Mixed-version Cassandane testing¶
This is a good point to make sure that replication and murder setups can talk to each other between versions.
Add [cyrus murder] and [cyrus replica] sections to your cassandane.ini and configure each with their own prefix, different from your [cyrus default] one. Check cassandane/cassandane.ini.example in the repository for examples with comments. Do the same for [cyrus backup] if you like -- it's not documented like the others, but it works the same way.
For each prefix you've configured, check out the Cyrus version you want to run there, do a from-scratch complete build with
./configure --prefix=/the/prefix ...
and install itDo the same for your usual [cyrus default] prefix
Check out the version whose Cassandane you want to run. Rebuild Cassandane's binary components with
make -C cassandane/utils
Run Cassandane -- the Replication, MurderIMAP, and MurderJMAP suites are significant here, and the Backups suite if you configured [cyrus backup].
Rinse and repeat for other combinations
You should do this in four combinations:
[cyrus default] built from master branch, others built from the current stable branch, and running Cassandane from the master branch
Same as 1, but running Cassandane from the current stable branch
[cyrus default] built from the current stable branch, others built from the master branch, and running Cassandane from the current stable branch
Same as 3, but running Cassandane from the master branch
lib/imapoptions¶
I'm not sure about whether we want to do this step at each snapshot, or save it for a big batch at the next major release. The difference is whether we conceptually treat these tags as releases of the feature or not.
If we do do this:
Check through lib/imapoptions for options with "UNRELEASED" in any of their version fields.
Replace these with the version number that this snapshot will be tagged as.
If any have been missed, there will be warnings (in yellow) when trying to (re)generate lib/imapopts.c. You can run
touch lib/imapoptions && make lib/imapopts.c
to check
Release notes¶
Snapshot release notes are like major x.y.0 release notes, in that they contain a high-level overview of the new features/etc, but not a blow-by-blow of every commit. They describe the changes since the last stable series, which means the release notes for each subsequent snapshot start as a copy of the previous, and reset only when a new stable series forks. The release notes for the developer snapshots will form the starting point for the release notes of the next major release.
Release notes live under docsrc/imap/download/release-notes/
.
Copy the release notes from the previous snapshot of this series into a new file for this snapshot. If this is the first snapshot of the series, then copy the <series>.0-alpha0 release notes instead.
Review the contents of all the changes/next/* files. Flesh out the new release notes document accordingly. (Compare previous ...-beta* and x.y.0 release notes to get a sense of the tone and level of detail.)
Review docsrc/imap/download/upgrade.rst, also with reference to the changes/next/* files. Make any necessary updates. We expect people upgrading to the new version to follow these instructions, so they'd better be as complete and correct as we can get them.
Review docsrc/imap/rfc-support.rst, also with reference to the changes/next/* files, and make any necessary updates. Also compare this file with the version of it on the stable branch. Check for any changes that don't have an accompanying changes/next file, and if there are any, also add suitable release notes and/or upgrade documentation for those.
Should the changes/next files be removed at this point? I'm not sure, we have not done any snapshot releases since we started tracking changes like that. The major releasing process assumes that this all happens as a big bang before the x.y.0, but if we return to doing regular snapshots, we can distribute that load over the year. If the changes/next files are removed as they're integrated into a snapshot, that will be less confusing, but it will be harder to do a holistic review later. Maybe they can be moved aside somewhere instead of removed, to changes/<snapshot-version> or something...
docsrc/conf.py¶
Update all the relevant version strings in docsrc/conf.py
check documentation¶
Make sure your RST changes are good:
make doc-html
. Pay attention to any errors or warnings (they will be coloured). There will be some you can clearly ignore, such as glob patterns for future release notes that don't exist yet, but do your best to deal with everything else. The generated documentation will be under the doc/html/ directory -- examine it in your browser to make sure all your formatting and such makes sense.
PR and/or commit¶
Once you're satisfied that you've done everything that needed doing here, commit the changes to a branch and submit a PR. Historically we've usually just made these changes directly on master, but since our workflow uses PRs these days, let's try that.
Once the PR has been approved, rebase your branch on top of current master, force-push it, and then "Merge" it through the GitHub UI.
Tag¶
You'll want to apply the tag to the merge commit where the PR landed. Usually this will be the head of master, but if there's been hang time between merging the PR and starting this step, other merges might have snuck in on top of it. That's fine, just be careful about which commit you're tagging.
Make sure your master branch is checked out, clean, and up to date
Create a signed, annotated tag declaring that this is now whatever version it is:
git tag -s cyrus-imapd-<snapshot-version>
You will be prompted to enter a commit message for the tag (this is what makes it an "annotated" tag). Ellie uses something like "Developer release <version>".
You will also be prompted to enter the pass phrase for your GPG key, do it.
It's a good idea to do a full build-and-test of a release tarball at this point, just to make sure things are sane. Throw the tarball away when you're done though, we don't publish it.
Push the new tag:
git push ci cyrus-imapd-<snapshot-version>
Fastmail specific: also push the new tag to the Fastmail repo.
Tell the world¶
Send an announcement to the cyrus-devel list.
Update this document¶
The process probably changed a little in practice. Update this document to match reality!